CONCRETE WHEEL STOPPERS • UAE
Precast Concrete Wheel Stoppers & Parking Products in the UAE
Concrete parking stops, car-park blocks and light-pole / post foundations for commercial, residential, industrial and public parking areas
Jetons supplies precast concrete wheel stoppers for controlled vehicle stopping positions and can coordinate UAE-wide delivery, fixing and installation when included in the confirmed scope.
Choose the required wheel-stopper type below or send the approved parking layout, product drawing or light-pole foundation detail for technical review and quotation.
WHEEL STOPPER RANGE AT A GLANCE
Concrete Wheel Stopper Supplier in the UAE for Parking, Industrial and Infrastructure Projects
Contractors, consultants, developers and facility teams can use this page to compare Jetons wheel-stopper types, parking post / light-pole bases, common applications, installation considerations and the information normally required before quotation.
Which wheel stoppers and parking products does Jetons supply?
Direct answer: Jetons presents Concrete Wheel Stopper – Type 1, Concrete Wheel Stopper – Type 2, and a Parking Post Foundation / Light-Pole Base for approved post and lighting requirements.
The appropriate product depends on the parking layout, vehicle type, required dimensions, substrate, fixing system, finish, quantity, project location and consultant or authority requirements. Final manufacture and installation should follow the approved drawing.
Concrete Wheel Stopper – Type 1
- Catalogue reference: 1800 × 160 × 120
- Low-profile parking-stop route
- Verify units, holes, anchors and finish
Concrete Wheel Stopper – Type 2
- Catalogue reference: 2000 × 210 × 150
- Alternative wheel-stopper geometry
- Verify bay clearance, fixing and finish
Parking Post Foundation / Light-Pole Base
- Project-specific precast base
- Anchor-bolt, socket or duct interfaces
- Verify loads, finished level and drawing
DIRECT PRODUCT EXPLANATION
What Is a Precast Concrete Wheel Stopper?
A precast concrete wheel stopper is a factory-produced concrete parking-control element fixed near the end of a parking bay to help define where a vehicle should stop. It can help reduce low-speed overrun toward kerbs, landscaping, walls, walkways or equipment zones when correctly positioned.
What else is it called?
Buyers may also search for a concrete parking stop, parking block, car-park wheel stop, parking kerb or parking bumper. The approved product drawing—not the search term alone—should determine the final dimensions, fixing arrangement and placement.
What should be checked before installation?
- Approved parking-bay geometry and vehicle class
- Wheel position, overhang and required setback
- Concrete, asphalt or interlock-paver substrate
- Fixing holes, anchors and drilling clearances
- Drainage, pedestrian routes, EV chargers and services
- Paint, reflective treatment and maintenance requirements
Concrete Wheel Stoppers and Parking Post / Light-Pole Bases
The product names below are kept exactly as finalized. Review the current product drawing and approved project information before manufacture, fixing or installation.
CONCRETE PARKING STOP • TYPE 1
Concrete Wheel Stopper – Type 1
The current product detail identifies the 1800 × 160 × 120 catalogue configuration. Confirm the dimensional units, fixing-hole arrangement, anchors, concrete and reinforcement, finish and exact set-out line before manufacture or installation.
CONCRETE PARKING STOP • TYPE 2
Concrete Wheel Stopper – Type 2
The current product detail identifies the 2000 × 210 × 150 catalogue configuration. Confirm the drawing units, bay geometry, vehicle clearance, fixing method, product weight, finish and compatibility with the approved parking layout.
POST & POLE FOUNDATION
Parking Post Foundation / Light-Pole Base
A project-specific precast base for approved parking posts, signs, access-control posts or compatible light-pole arrangements. Send the pole drawing, base plate or socket detail, anchors, ducts, reinforcement, loads, finished level, quantity and installation requirement for review.
Need Help Confirming the Product?
Send the approved parking layout, BOQ or post / pole drawing. Jetons can review the product reference, quantity, installation surface, fixing requirement, finish, project location and delivery programme before quotation.
PRODUCT SELECTION GUIDE
How to Choose the Right Concrete Wheel Stopper or Parking Foundation
The correct starting point is the approved application, vehicle geometry and installation condition—not the product name alone. Use the following checks to prepare the inquiry, then confirm the final detail with the consultant, authority or responsible designer.
1. Define the Vehicle & Bay
Confirm passenger cars, SUVs, fleet vehicles or mixed use; review tyre position, overhang and approved parking-bay length.
2. Confirm Setback & Clearances
Maintain the specified distance from walls, kerbs, columns, walkways, landscaping, chargers and other equipment.
3. Verify Surface & Fixing
Identify concrete slab, asphalt or interlock paving and confirm the approved anchors, sleeves, adhesive or alternative fixing.
4. Confirm Finish & Handover
Check natural concrete or painted finish, colour pattern, reflective treatment, tolerances, inspection and handover requirements.
| Product | Typical inquiry intent | Key details to verify |
|---|---|---|
| Concrete Wheel Stopper – Type 1 | Low-profile concrete parking stop using the 1800 × 160 × 120 catalogue reference. | Units, fixing holes, anchors, layout position, finish, vehicle and substrate compatibility. |
| Concrete Wheel Stopper – Type 2 | Alternative parking-stop geometry using the 2000 × 210 × 150 catalogue reference. | Units, bay geometry, clearances, fixing arrangement, product weight, finish and approval. |
| Parking Post Foundation / Light-Pole Base | Precast base for a post, sign, access-control device or compatible light-pole arrangement. | Approved drawing, loads, post interface, anchors or socket, ducts, reinforcement and finished level. |
Concrete, Asphalt & Interlock Surfaces
The fixing method must suit the actual substrate, thickness and condition. Concrete anchors, asphalt solutions and interlock details are not automatically interchangeable.
Visibility & Finish
Confirm natural concrete, painted finish, colour pattern, reflective strips or markers and the party responsible for future maintenance.
Post & Light-Pole Foundations
Foundation geometry, concrete and reinforcement, anchors, ducts, pole interface, loads and finished level must follow the approved project drawing.
COMMON UAE PROJECT APPLICATIONS
Where Concrete Wheel Stoppers and Parking Products Are Used
Precast parking stops support organized vehicle positioning in new developments, existing facilities and managed private sites. Final placement should follow the approved layout, safe clearances and the required fixing detail.
Commercial & Retail Car Parks
Parking bays for shopping centres, offices, showrooms, supermarkets and mixed commercial developments.
Residential & Mixed-Use Projects
Apartment, villa, podium, basement and visitor parking areas with approved bay layouts.
Warehouses & Logistics Facilities
Employee, visitor, fleet and controlled vehicle areas around warehouses, depots and distribution centres.
Industrial & Utility Sites
Managed parking and low-speed vehicle-control zones within factories, plants, workshops and utility compounds.
Ports, Terminals & Rail Facilities
Vehicle stopping positions in approved industrial, port, terminal and rail-yard parking or operational layouts.
Schools, Clinics & Public Facilities
Parking areas where orderly stopping positions, pedestrian clearances and controlled access are important.
ORIGINAL PROJECT PHOTOS • PRODUCTION & INSTALLATION
Real Wheel Stopper and Precast Foundation Project Photos
These original project photographs show wheel-stopper production, painting, bulk readiness, industrial installation and project-specific precast pole / light-pole foundations. Image descriptions are placed below the photographs, with no text overlay.
Installed Parking Area
Original project photo showing concrete wheel stoppers defining vehicle stopping positions after installation.
Bulk Production & Finish
Rows of finished wheel stoppers prepared in quantity for phased parking and infrastructure requirements.
Production Team
Original production photo showing wheel stopper preparation and factory handling before dispatch.
Painting & Finishing
Project-specific colour finishing can be coordinated when included in the approved product specification.
Unpainted Wheel Stoppers
Natural concrete units showing the wheel-stopper profile and fixing-hole arrangement before final finishing.
High-Visibility Finish
Finished wheel stoppers prepared with a high-visibility yellow-and-black project colour pattern.
Port Installation
Installed wheel stoppers supporting defined vehicle stopping positions in an industrial port environment.
Container-Terminal Installation
Original site photo showing wheel stoppers aligned along a controlled vehicle area at a logistics facility.
Industrial Rail-Yard Use
Wheel stoppers used within an industrial vehicle-control layout where final positioning follows the approved site plan.
Finished Project Units
Completed precast wheel stoppers arranged after painting and finishing for project dispatch.
Protective-Coated Foundation
Project-specific precast foundation with protective coating for an approved pole or lighting arrangement.
Anchor-Bolt Foundation
Precast foundation showing the anchor-bolt interface used for a project-specific pole or mast arrangement.
Cylindrical Foundation
Protective-coated cylindrical foundation during lifting and handling before project delivery.
Night Production
Original production photo showing an anchor-bolt foundation during precast factory operations.
Bulk Foundation Production
Multiple precast foundations prepared in quantity with project-specific anchor-bolt arrangements.
Pedestal Foundation Base
Project-specific pedestal foundation base for approved post, column or compatible lighting arrangements.
Foundation Handling
Heavy precast foundation handling prior to transport, subject to the approved lifting and logistics plan.
Pole Foundation Pedestal
Pedestal foundation showing the anchor-bolt arrangement for a project-specific pole interface.
GEOGRAPHIC COVERAGE & LOGISTICS
Wheel Stopper Supply, Delivery and Installation Across the UAE
Jetons coordinates wheel-stopper and parking-product requirements throughout the Emirates, with transport and site planning based on quantity, unit dimensions, access, unloading arrangements, surface readiness and installation sequence.
UAE-WIDE PROJECT SUPPORT
Plan the Product and the Installation Together
Coverage can be coordinated for Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, including Al Ain, Al Dhafra and other project locations where the delivery route and programme are workable.
A complete quotation should identify the wheel-stopper or foundation product and the practical site conditions that affect transport, offloading, drilling, fixing and placement.
- Project location, access route and delivery restrictions
- Quantity, unit dimensions, weight and load planning
- Gate passes, permits and restricted working hours
- Offloading and storage arrangements
- Installation surface, service clearance and drilling access
- Anchors, alignment, paint / reflective finish and handover scope
Abu Dhabi, Al Ain & Al Dhafra
Supply and installation planning for urban developments, industrial areas, logistics facilities and remote project locations.
Dubai
Support for commercial, residential, infrastructure, warehouse, retail, port and managed-site parking requirements.
Sharjah, Ajman & Umm Al Quwain
Northern-area enquiries can be planned around quantities, transport access, unloading, site restrictions and delivery sequencing.
Ras Al Khaimah & Fujairah
Project support can be assessed for industrial, port, development, logistics and managed parking applications.
CONNECTED JETONS PROJECT SUPPORT
From Product Review to Delivery and Fixing
Clients may purchase the confirmed precast product only or coordinate a wider scope covering technical review, manufacturing support through Beam Concrete Work where applicable, transport, fixing and installation support.
Review the Requirement
Share the product type, approved drawing or parking layout, quantity, project location, programme and consultant requirements.
Confirm Product & Scope
Confirm dimensions, units, concrete, reinforcement, fixing holes, anchors, finish and whether the inquiry includes installation.
Plan Production & Logistics
Coordinate production or stock availability, truck loads, site access, delivery timing, offloading and storage.
Fix, Align & Handover
Where included, coordinate mark-out, service checks, drilling, anchors, alignment, finishing and agreed inspection or handover.
QUOTATION & COMMERCIAL INFORMATION
Concrete Wheel Stopper Quotations and Price Factors in the UAE
Wheel-stopper and precast foundation pricing is project-specific. Product geometry, concrete and reinforcement, quantity, fixing requirements, finish, delivery distance, offloading and installation can all affect the final rate.
Technical Information to Send
- Concrete Wheel Stopper Type 1, Type 2 or Parking Post Foundation / Light-Pole Base
- Approved parking layout, product drawing or BOQ
- Confirmed dimensions and units
- Installation surface: concrete, asphalt, interlock or other
- Fixing holes, anchor specification or approved fixing method
- Concrete, reinforcement, finish, paint or reflective requirements
- Consultant, client or authority requirements
Commercial & Logistics Information
- Required quantity and phased delivery sequence
- Project name, emirate and exact site location
- Required delivery date and permitted working hours
- Site access, truck restrictions and gate-pass requirements
- Offloading responsibility and available equipment
- Whether mark-out, scanning, drilling, fixing and installation are required
- Inspection, sample, mock-up or handover requirements
What affects the price of a concrete wheel stopper?
Direct answer: the major cost drivers are product size and profile, concrete and reinforcement, mould / production route, quantity, surface finish, painting or reflective treatment, anchors and fixing components, transport load efficiency, delivery distance, offloading and installation.
For the most accurate comparison, request quotations against the same approved product, quantity, scope and delivery conditions.
Ready to Request a Wheel Stopper Quotation?
Send the available drawings, quantities, project location, installation surface and required delivery programme. Any information that is still unconfirmed can be marked for technical review.
CONCRETE WHEEL STOPPER FAQ
Frequently Asked Questions
These answers help contractors, consultants, procurement teams and project managers prepare the information needed for product selection and quotation. Final manufacture, fixing, installation and acceptance remain subject to approved technical information.
What is a concrete wheel stopper?
A concrete wheel stopper is a precast parking-control element installed near the end of a parking bay to define the vehicle stopping position. It can help limit low-speed overrun, but it is not automatically a crash-rated barrier or a substitute for bollards and engineered impact protection.
Which wheel stopper and parking products does Jetons supply?
This page covers Concrete Wheel Stopper – Type 1, Concrete Wheel Stopper – Type 2, and Parking Post Foundation / Light-Pole Base for approved post, sign, access-control or compatible lighting requirements.
What is the difference between Wheel Stopper Type 1 and Type 2?
They are separate catalogue configurations with different referenced dimensions and geometry. The correct choice should follow the approved parking layout, vehicle and clearance requirements, fixing details, substrate, finish and consultant or client acceptance.
What concrete wheel stopper dimensions are available?
The current Type 1 product detail references 1800 × 160 × 120, while Type 2 references 2000 × 210 × 150. Confirm the dimensional units and current technical drawing before ordering; a product title should not be treated as the complete specification.
Can wheel stoppers be installed on concrete, asphalt or interlock paving?
Installation may be possible on different surfaces, but the fixing method must be selected for the actual substrate, thickness, condition and project requirement. Concrete anchors, asphalt solutions and interlock details are not automatically interchangeable.
Are anchors, paint and reflective markings included?
These items are included only when stated in the confirmed quotation. Specify the anchor type, finish, colour pattern, reflective strips or markers and maintenance requirement in the inquiry.
Does Jetons provide concrete wheel stopper installation?
Installation can be coordinated when the product, approved set-out, substrate, utility clearance, fixing method, access and scope are confirmed. The quotation should clearly state whether mark-out, drilling, anchors, alignment, finishing and handover are included.
Can Jetons supply parking post foundations or light-pole bases?
Project-specific precast bases can be reviewed from the approved post or pole drawing, loads, interface, anchors or socket, ducts, reinforcement, concrete requirements, finished level, quantity and programme.
Can wheel stoppers be delivered across the UAE?
UAE-wide delivery can be planned for Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain, Al Ain, Al Dhafra and other project locations, subject to quantity, access, unloading arrangements and programme.
Are concrete wheel stoppers crash barriers?
No. A standard concrete wheel stopper is a parking-control element for defining a stopping position. It should not be represented as a crash-tested road-restraint barrier unless a separate engineered product and supporting documentation explicitly establish that performance.
What should I send for a wheel stopper quotation?
Send the product type, quantity, approved layout or BOQ, dimensions and units, installation surface, fixing requirement, finish, project location, required date, access details and whether delivery or installation support is needed.
START YOUR PARKING-PRODUCT INQUIRY
Need Concrete Wheel Stoppers for a UAE Project?
Send the required wheel-stopper type or parking post / light-pole foundation drawing, quantity, approved layout, project location, fixing details and required delivery programme. Jetons can review product supply, transport and installation support according to the confirmed scope.
DIVISIONS
Jetons General Contracting
Jetons General Trading
Beam Concrete Works
Jetons Transportation
QUICK LINKS
About Us
Projects
FAQ's
Careers
CONTACT US
📞 Phone
✉️ Email
📮 P.O. Box
UAE Coverage
Abu Dhabi | Dubai | Sharjah | Ajman | RAK | Al Ain
Supply • Transportation • Installation • Traffic Management
Project Support Across UAE
CERTIFIED & TRUSTED
Certified to International Standards • Trusted by Clients • Committed to Quality
