JETONS TRADING · URBAN PROTECTION
City Bollards Type 1 Supplier in the UAE
Product reference JT0010 · Plastic Materials Range
Flexible city bollard range for urban traffic management, parking zones and protected pedestrian areas.
Jetons can coordinate product supply, UAE-wide delivery and related project support according to the confirmed quantity, site conditions and programme.
Product Type
Urban Protection
Published Reference
JT0010
Source Range
Plastic Materials
Project Market
United Arab Emirates
DIRECT PRODUCT ANSWER
What Is City Bollards Type 1?
Flexible city bollard range for urban traffic management, parking zones and protected pedestrian areas.
The published Jetons Trading reference is JT0010. Use the original data sheet shown on this page to identify the listed model information, then confirm the latest project requirement before procurement or installation.
- Road-fixed installation with screw and anchor.
- PU body across listed models.
- Multiple bollard profiles in the same family.
- Published model and technical information available from the original Jetons Trading data sheet.
- Product selection should be matched to the intended application, site conditions and approved project requirements.
WHY THIS PRODUCT
Why Specify City Bollards Type 1?
Use the published source data to identify the product, then match the exact model to the approved application, site conditions and project requirement.
City Bollards Type 1
Road-fixed installation with screw and anchor.
Project Selection
PU body across listed models.
Source Datasheet
Multiple bollard profiles in the same family.
UAE Supply Support
Published model and technical information available from the original Jetons Trading data sheet.
Application Review
Product selection should be matched to the intended application, site conditions and approved project requirements.
Quotation Control
UAE-wide supply and logistics support can be coordinated subject to quantity, location and programme.
TYPICAL APPLICATIONS
Where Is City Bollards Type 1 Used?
Typical applications are shown for buyer guidance. The approved site layout, project specification and exact product configuration remain the final basis for selection.
Parking Garages
Protection and visibility support within parking structures and vehicle circulation areas.
Building Approaches
Can support safer movement around building entrances, ramps and service approaches.
Warehouses
Useful around columns, corners, aisles and vehicle routes in warehouse environments.
Commercial Facilities
Suitable for review in malls, offices, hotels and mixed-use developments.
Industrial Facilities
Can support asset protection and safer vehicle movement in industrial sites.
Loading & Service Areas
Useful around loading bays, service corridors and controlled operational spaces.
TECHNICAL INFORMATION
City Bollards Type 1 Data Sheet & Published Product Information
The original datasheet is reproduced below as an image, followed by searchable technical information taken from the source page.
ORIGINAL DATA SHEET
Published Technical Reference
The original source data sheet is displayed directly beside this technical summary so buyers, engineers and procurement teams can review the published product information without opening a separate PDF.
- Product: City Bollards Type 1
- Reference: JT0010
- Category: Urban Protection
- Source sheet: PLASTIC-MATERIALS-10
| Model | Dimensions / Size | Material | Weight / Detail |
|---|---|---|---|
| JCH 12214 | 200 × 840 mm | PU | 1.6 kg |
| JCH 12216 | 200 × 840 mm | PU | 1.6 kg |
| JCH 12218 | 220 × 870 mm | PU | 3.3 kg |
| JCH 12219 | 200 × 840 mm | PU | 1.6 kg |
PRODUCT SELECTION
Is City Bollards Type 1 Right for Your Project?
Do not select the final product only from a photograph or familiar product name. Use the published data sheet together with the approved site and project information.
- Confirm the Product ReferenceIdentify JT0010 or the required alternative from the latest enquiry, BOQ or approved project information.
- Check Dimensions & ConfigurationConfirm the published size, model, material, colour and any alternative configuration shown in the original data sheet.
- Define the ApplicationState where the product will be used and whether the requirement is temporary, permanent, road-based, facility-based or event-related.
- Confirm Fixing / InstallationWhere applicable, identify screw fixing, adhesive, base, ballast, mounting, assembly or other installation requirements.
- Review Visibility & Safety DetailsConfirm reflective tape, colours, warning signs, lights or other visibility features where these are required by the project.
- Plan Quantity, Delivery & Site AccessProvide quantity, project location, required date, access restrictions, unloading responsibility and installation scope.
RELATED PLASTIC MATERIALS
Related Products for City Bollards Type 1
Compare closely related Jetons Trading products when planning the complete road-safety, access-control, parking or project requirement.
CONNECTED JETONS SUPPORT
Supply, Delivery and Project Support
Clients can request a product-only quotation or combine supply with logistics, installation and traffic-management support where applicable.
Product Supply
Source the confirmed product model and quantity through Jetons Trading.
Transportation & Delivery
Coordinate vehicle allocation, delivery timing and UAE project logistics where required.
Installation Support
Review applicable fixing, placement or installation support according to the product and site requirement.
Traffic Management Support
Connect the product requirement with work-zone traffic management, closures, signage or TMA support where relevant.
UAE-WIDE DELIVERY
City Bollards Type 1 Supply Across the Emirates
Jetons can coordinate product supply and delivery across the UAE. Final availability, vehicle requirements, timing and scope depend on the confirmed model, quantity, project location and programme.
Abu Dhabi, Al Ain & Al Dhafra
Confirm delivery windows, gate passes, route restrictions, offloading areas and site-access requirements.
Dubai, Sharjah & Ajman
Review timed deliveries, urban access, storage, unloading and working-hour controls where applicable.
RAK, Fujairah & Umm Al Quwain
Plan route conditions, industrial or remote-site access, unloading arrangements and required delivery sequence.
REQUEST A QUOTATION
Request Price, Availability and Technical Information
Send the available product and project information so the Jetons team can review the exact requirement and confirm the appropriate commercial and delivery scope.
Product & Technical Information
- Product name: City Bollards Type 1
- Published reference: JT0010
- Required model / size / colour
- Required quantity
- Original data sheet or project specification
- Reflective, warning or accessory requirements where applicable
- Fixing or installation requirement
Project, Delivery & Site Information
- Project name and UAE location
- Main contractor / customer entity
- Required delivery date and sequence
- Site access, permits or working-hour restrictions
- Offloading and storage responsibility
- Supply only, delivery, installation or traffic-management scope
- Any consultant or authority requirement
PRODUCT FAQ
City Bollards Type 1 FAQs
Common buyer, contractor and procurement questions before a technical review or quotation.
What is City Bollards Type 1?
What is the published reference for City Bollards Type 1?
Where can City Bollards Type 1 be used?
What should be confirmed before ordering?
Can Jetons arrange UAE-wide delivery?
Is the original data sheet available on this page?
REQUEST PRODUCT SUPPORT
Need City Bollards Type 1 for a UAE Project?
Send the required model, quantity, project location, technical requirement and delivery programme. Jetons can review the product requirement and coordinate the appropriate supply, logistics and applicable project support.