PRECAST CONCRETE BARRIER

Single-Side Transition Concrete Barrier Supplier in the UAE

Transition Unit for Compatible Single-Side Barrier Interfaces

The Single-Side Transition Barrier is a precast concrete barrier transition unit used to create the approved interface between compatible barrier models or profiles where the system drawing requires a dedicated transition unit. It is identified by its single-side transition profile and the catalogue reference “Transition model”.

“Single-side transition” describes a transition geometry on the single-side barrier system. A transition unit is assessed together with the exact barrier model and profile on each side; it is not a substitute for a normal continuation unit.

Jetons can coordinate product supply, UAE-wide delivery, lifting, installation, painting and traffic-management support according to the agreed project scope.

Request Price & Availability

View Technical Information

Available support: Product supply • UAE-wide delivery • Lifting and installation • Painting • Traffic-management coordination

Single-Side Transition Concrete Barrier supplied for UAE road, traffic-management and infrastructure projects

PRODUCT PURPOSE

Purpose-Made Transition Between Compatible Barrier Configurations

Confirm the exact dimensions, connections, fixing and system compatibility from the approved drawing.

Product Type

Precast concrete barrier transition unit

Profile

Single-side transition

Configuration

Transition configuration

Published Reference

Purpose-made transition • controlled interface

DIRECT PRODUCT ANSWER

What Is a Single-Side Transition Barrier?

The Single-Side Transition Barrier is a precast concrete barrier transition unit used to create the approved interface between compatible barrier models or profiles where the system drawing requires a dedicated transition unit. It is identified by its single-side transition profile and the catalogue reference “Transition model”.

Published Jetons reference: The current Jetons data sheet identifies a dedicated single-side transition unit. Exact length, profile changes, orientation, connection details and compatible barrier models must be confirmed from the controlled system drawing.

“Single-side transition” describes a transition geometry on the single-side barrier system. A transition unit is assessed together with the exact barrier model and profile on each side; it is not a substitute for a normal continuation unit.

The product should be selected from the approved barrier layout. Exact dimensions, adjoining units, connections or fixing, installation method and any required performance documentation must be checked before ordering.

Related buyer search terms: concrete barrier transition, single-side transition barrier, road-barrier interface unit, profile transition unit and Jersey-style barrier transition. These phrases can overlap in everyday procurement, but the approved model, profile, dimensions, connection and installed-system requirements determine technical suitability.

WHY THIS CONFIGURATION

Why Specify the Single-Side Transition Barrier?

This catalogue model gives contractors, engineers and procurement teams a clear product entity for drawings, BOQs, technical submissions and commercial enquiries.

Purpose-made interface: avoids treating a normal continuation barrier as a transition unit.
Geometry coordination: connects the barrier configurations identified on each side of the approved transition.
System continuity: supports a planned change within the barrier line rather than an improvised site solution.
Technical clarity: requires orientation, adjoining models and connection details to be confirmed before production.
Integrated support: can be supplied with transport, lifting, installation and traffic-management coordination.

Important: use this model only where the controlled project information requires its exact configuration.

TYPICAL APPLICATIONS

Where Is the Single-Side Transition Barrier Used?

The following are typical project environments for review. The approved layout, system details and project specification remain the final basis for selection.

Barrier Profile Interfaces

Used where the approved system requires a dedicated interface between compatible barrier models or geometries.

Roadworks & Diversions

May support temporary traffic arrangements where the barrier line changes from one approved configuration to another.

Permanent Infrastructure

Can be reviewed for permanent road or project layouts when the transition is included in the approved design.

End & Connection Zones

May be positioned near system interfaces, end zones or connection points defined by the barrier drawing.

Median & Road-Edge Systems

Can support approved transition requirements within median, lane-separation or road-edge barrier arrangements.

Matched Adjoining Units

The exact unit on each side, orientation, connection and installation sequence must be confirmed before ordering.

Single-Side Transition Barrier concrete barrier technical data sheet

Data-sheet note: the current reference image for Single-Side Transition Barrier is displayed here. Use the latest controlled drawing or PDF for procurement, production, technical submission and installation.

TECHNICAL INFORMATION

Published Product Reference and Buyer Checks

The current Jetons data sheet provides the published product reference. Searchable values are repeated below for buyers and technical teams, while the latest controlled drawing remains the governing document for production, approval and installation.

Product Name

Single-Side Transition Concrete Barrier

Product Type

Precast concrete barrier transition unit

Profile

Single-side transition geometry

Primary Purpose

Create the approved interface between specifically identified compatible barrier profiles

Overall Dimensions

Confirm from the current controlled transition drawing

Barrier at Side A

Confirm exact model, height, profile and connection

Barrier at Side B

Confirm exact model, height, profile and connection

Orientation

Confirm direction, exposed face and installation sequence; transition units are not automatically reversible

Connection / Fixing

Confirm pins, loops, bolts, cast-in items, anchoring or other approved details

Unit Weight

Confirm before transport, offloading and crane planning

Concrete / Reinforcement

Use the approved transition-unit drawing and project specification

Lifting / Handling

Use only the approved lifting points, rigging angles and handling method

Finish / Painting

Confirm finish, colour pattern, logos and identification requirements

Performance Documentation

Confirm system-level testing, containment and authority evidence applicable to the complete transition arrangement

Drawing-control rule: use the published values for product identification and enquiry only. If any field, product code, table or illustration differs from a later approved drawing, the latest controlled project document governs.

Open Current Data Sheet

Request Controlled Drawing / PDF

PRODUCT SELECTION

Is the Single-Side Transition Barrier Right for Your Project?

This model should be ordered only when the approved layout, BOQ or technical submission requires its exact profile and configuration.

Buyer check: identify the complete barrier system—not only the individual unit. Ends, transitions, connections, adjoining units, installation and performance requirements can affect suitability.

Discuss Product Suitability

1. Approved Barrier Layout

Confirm that the current drawing specifically identifies the Single-Side Transition Barrier at the required location. Select the unit from controlled project information rather than a photograph or product name alone.

2. Adjoining Barrier Models

Identify the barrier units, transitions or end treatments placed on each side. Profiles, heights, connections and system details must be compatible.

3. Product-Specific Detail

Identify the exact barrier model and profile on both sides, the transition direction, connection details and the correct installation orientation.

4. Temporary or Permanent Use

State whether the arrangement is temporary or permanent. This may affect the fixing, anchoring, connection, finish, documentation and installation method.

5. Performance & Authority Requirements

Where the project requires a containment level, crash-test report, RTA or ITC requirement, consultant approval or another standard, request the verified documentation applicable to this exact model and installed arrangement.

6. Delivery, Lifting & Site Access

Confirm unit weight, lifting points, vehicle access, gate passes, permits, offloading scope, crane or Hiab requirements, storage area, placement sequence, working hours, painting and project markings.

RELATED BARRIER OPTIONS

How Does the Single-Side Transition Barrier Compare With Related Models?

The correct product depends on the required profile, length, end or connection detail, application and complete approved barrier system.

Barrier Model

Main Difference

Typical Selection Reason

Single-Side Transition Barrier

Single-side transition unit

Selected where the approved barrier system must interface between compatible configurations.

Single-Side Flat 940–2.4 m

Single-side flat model with 940 / 2.4 m designation

Selected where the approved drawing calls for this project-specific single-side geometry.

Single-Side Permanent 3 m

Single-side 3 m model designated for permanent use

Selected for an approved permanent layout with confirmed fixing and foundation details.

Single-Face 2 m End

Single-face end unit with a 2 m designation

Selected where the layout calls for one principal barrier face and this end geometry.

Double-Face 3 m

Double-face 3 m continuation unit

Selected for the main run of a compatible double-face barrier arrangement.

View All Concrete Barriers

Ask for Model Comparison

UAE-WIDE PROJECT SUPPORT

Supply, Delivery and Installation Options

Clients can request the Single-Side Transition Barrier as a product-only order or combine it with transportation, lifting, installation, painting and traffic-management support.

Product Supply

Supply based on the confirmed Single-Side Transition Barrier model, approved drawing, quantity, finish and project programme.

Explore Beam Concrete Work →

Transportation & Delivery

Vehicle allocation, load planning, route coordination, delivery sequencing and project-site access across the UAE.

View Transportation →

Lifting & Installation

Offloading, lifting, positioning, alignment, connection or fixing, supervision, inspection and handover support.

View Installation Services →

Traffic Management Support

Road closures, diversions, TMA support, signage, marshals and temporary work-zone control where required.

View Traffic Management →

UAE-WIDE SUPPLY, DELIVERY & INSTALLATION

Single-Side Transition Barrier Support Across the Emirates

Jetons coordinates product supply and can review transportation, lifting, installation, painting and traffic-management requirements throughout the UAE. Final availability and scope depend on the approved model, quantity, programme and site conditions.

Abu Dhabi, Al Ain & Al Dhafra

Confirm route restrictions, gate passes, delivery windows, remote-site access, laydown space, crane or Hiab position and any ITC or project-specific traffic-management requirements.

Dubai, Sharjah & Ajman

Review urban access, timed deliveries, road permits, unloading restrictions, working-hour controls, storage, installation sequence and coordination with active road or development works.

RAK, Fujairah & Umm Al Quwain

Plan mountain, coastal, industrial or remote-site routes, vehicle access, unloading areas, ground-bearing conditions, lifting reach, storage supports and installation supervision.

Product-specific planning: Transition units should be dispatched only after the adjoining barrier models, orientation and connection details are confirmed. Delivery sequencing must keep each transition with its matching barrier run and installation location.

REQUEST A QUOTATION

Request Price, Availability and Technical Information

Send the available product and project information so our team can review the exact Single-Side Transition Barrier requirement and the required supply, delivery or installation scope.

When the final drawing is not yet approved, share the latest BOQ, layout or data sheet and identify which information is still pending.

Request Price & Availability

Product & Technical Information

Product name: Single-Side Transition Barrier
Official model or product code, if applicable
Required quantity
Approved drawing or latest data sheet
Adjoining barrier models and orientation
Required connection, fixing, loop, bolt or transition detail
Concrete, reinforcement or finish specification
Painting colours, logos and project markings
Required test, approval or technical-submission documents

Project, Delivery & Installation Information

Project name and location
Main contractor or project entity
Consultant or authority requirements
Required delivery date and sequence
Gate-pass, permit and working-hour requirements
Site-access and storage restrictions
Offloading and lifting responsibility
Supply only, delivery, installation or traffic-management scope

PRODUCT FAQ

Single-Side Transition Barrier FAQs

These answers address common contractor, engineer and procurement questions before a technical review or quotation.

QUICK ANSWER

The Single-Side Transition Barrier is a precast concrete barrier transition unit used to create the approved interface between compatible barrier models or profiles where the system drawing requires a dedicated transition unit. The approved data sheet must confirm dimensions, weight, reinforcement, connection or fixing details, lifting arrangements and any required performance documentation before procurement or installation.

What is a Single-Side Transition Barrier?

It is a precast concrete barrier transition unit identified by its single-side transition profile and Transition model designation. Its purpose is to create the approved interface between compatible barrier models or profiles where the system drawing requires a dedicated transition unit. Exact dimensions and system details must be confirmed from the approved data sheet.

What is a transition concrete barrier?

It is a purpose-made unit used at an approved interface between compatible barrier models or profiles rather than as a normal continuation section.

Which barriers does this unit transition between?

The exact models on both sides must be identified on the controlled system or project drawing. Do not infer compatibility from appearance alone.

Can it be installed in either direction?

Orientation must follow the approved transition drawing. A transition may have a defined direction and connection arrangement.

Where is a transition barrier used?

It may be used in approved road, median, road-edge, temporary or permanent layouts where the barrier configuration changes.

What technical information should be confirmed before ordering?

Confirm the latest data sheet, exact dimensions, unit weight, concrete and reinforcement requirements, connections or embedded details, lifting points, finish, painting, quantity and applicable performance documentation.

Does Jetons provide delivery and installation?

Yes. The quotation can include UAE-wide transportation, offloading, lifting, positioning, installation, supervision, painting and traffic-management support according to the agreed scope.

Can the product be delivered across the UAE?

Delivery can be coordinated for Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah, Al Ain and other UAE locations, subject to project access, permits, vehicle requirements and the confirmed programme.

What information is needed for pricing?

Provide the product name, quantity, approved drawing or latest data sheet, project location, required date, finish requirements, offloading scope, installation requirements and any consultant or authority specification.

Compare Related Concrete Barrier Models

Review related units when the approved layout requires a different face profile, length, connection, end treatment, transition or application.

REQUEST PRODUCT SUPPORT

Need a Single-Side Transition Barrier?

Send your approved barrier layout, required quantity, project location, technical specification and delivery programme. Jetons will review the exact product requirement and the appropriate manufacturing, transportation, lifting, installation, painting and traffic-management scope.

Request a Quotation

Discuss Product Suitability

ChatGPT_Image_Jun_28__2026__04_50_10_PM-removebg-preview

DIVISIONS

Jetons General Contracting

Jetons General Trading

Beam Concrete Works

Jetons Transportation

QUICK LINKS

About Us

Projects

FAQ's

Careers

CONTACT US

📞 Phone

✉️ Email

💬 WhatsApp

📮 P.O. Box



UAE Coverage



Supply • Transportation • Installation • Traffic Management

Project Support Across UAE



CERTIFIED & TRUSTED

Certified to International Standards • Trusted by Clients • Committed to Quality