Concrete Spacers & Construction Accessories Supplier in the UAE
Reinforcement spacers, shim pads, hollow-core caps, chamfers, rebar caps and related accessories for concrete, precast, piling and installation works.
Jetons Trading supplies a practical range of construction spacers and accessories to support reinforcement positioning, concrete cover, levelling, edge formation, void closure, site safety and compatible fabrication requirements.
10 Product Types
The current catalogue presents ten confirmed spacer and construction-accessory product types in one selection route.
Application-Led Selection
Choose by reinforcement cover, levelling, pile-cage alignment, edge profile, void closure, safety or compatible fabrication need.
Project-Specific Sourcing
Dimensions, cover, bar size, profile, material and packing can be reviewed against a BOQ, drawing, sample or reference image.
UAE Logistics Support
Coordinate quantity, project location, required date and receiving conditions for construction-material supply from Abu Dhabi.
SPACER & ACCESSORY TYPES — QUICK SELECTOR
See every spacer and construction accessory without searching through the page.
Use the ten visual cards to identify the closest product type, then open its dedicated page or send the name with your quotation request.
Wheel Spacer
Circular reinforcement spacer for project enquiries that require controlled concrete cover around compatible bars, cages or curved reinforcement.
Clip Spacer
Clip-on reinforcement support for maintaining steel position and specified cover, subject to compatible bar diameter and project requirements.
Shim Pads
Flat support pads used for levelling, spacing and bearing adjustments in compatible precast, installation, glazing or mechanical applications.
Hollow Core Cap
End-cap accessory for closing compatible hollow-core slab voids during production, handling, finishing or project-specific installation work.
Four-Legged Spacer
Stable multi-leg reinforcement support for maintaining steel position and concrete cover in compatible slab, precast or mould applications.
Pile Cage Spacer
Circular cage spacer for maintaining radial concrete cover around compatible reinforcement cages in piles, shafts and foundation works.
Chamfer
Profile strip used to form a bevelled concrete edge and reduce sharp exposed corners in compatible precast moulds or formwork.
Roof Tile Spacer
Ring-style spacer accessory for compatible roof-tile separation, positioning or project-specific roofing installation requirements.
Rebar Cap
Protective cap for exposed reinforcement ends, subject to the required rebar diameter, site-safety type and project specification.
Welding Rod
Colour-coded welding-rod range listed with the current Jetons Trading spacer catalogue for compatible fabrication, joining and repair enquiries.
PRODUCT COMPARISON
Compare the ten spacer and accessory types by primary function.
The approved application controls the product. Similar-looking accessories should not be treated as interchangeable without confirming dimensions, cover, bar or component size, material, loading and project requirements.
| Product type | Primary selection role | Confirm before ordering |
|---|---|---|
| Wheel Spacer | Maintains cover around reinforcement or cages. | Bar or cage size, required cover, loading, spacing and approved specification. |
| Clip Spacer | Clip-on support for reinforcement positioning. | Bar diameter, cover height, orientation, load and approved product size. |
| Shim Pads | Levelling, packing, separation or bearing adjustment. | Length, width, thickness, material, load, quantity and installation interface. |
| Hollow Core Cap | Closes compatible hollow-core slab voids. | Slab profile, void diameter, cap dimensions, quantity and production stage. |
| Four-Legged Spacer | Supports reinforcement at a defined cover height. | Cover height, bar arrangement, load, spacing, base surface and approved size. |
| Pile Cage Spacer | Maintains radial cover around pile reinforcement cages. | Cage diameter, bar size, required cover, fixing method and longitudinal spacing. |
| Chamfer | Forms a bevelled edge on compatible concrete elements. | Profile shape, leg dimensions, length, material, fixing and finish requirement. |
| Roof Tile Spacer | Supports consistent separation or positioning in a compatible roofing system. | Tile system, spacer diameter, thickness, fixing method and required quantity. |
| Rebar Cap | Covers exposed reinforcement ends for compatible site-safety requirements. | Bar diameter, cap type, colour, safety requirement, quantity and approval. |
| Welding Rod | Compatible fabrication, joining or repair accessory. | Base material, rod profile, diameter, colour, welding process and quantity. |
TYPICAL PROJECT APPLICATIONS
Spacer and accessory solutions for concrete, precast, piling and installation work.
These application groups help buyers select the correct enquiry route. Final suitability must follow the approved drawing, specification, dimensions, load and installation requirements.
Reinforced Concrete Works
Wheel, clip and four-legged spacers can be reviewed where the approved work requires reinforcement positioning and defined concrete cover.
Precast Concrete Production
Spacer supports, shim pads and chamfers can assist compatible mould, reinforcement, bearing, handling and edge-formation requirements.
Piling & Deep Foundations
Pile cage spacers are the dedicated enquiry route for maintaining radial cover around compatible reinforcement cages.
Hollow-Core Slab Production
Hollow core caps can be reviewed against the approved slab profile, void diameter, production stage and finishing requirement.
Roofing & Installation
Roof tile spacers and shim pads are selected against the compatible system, dimensions, fixing method and installation interface.
Site Safety & Fabrication
Rebar caps and welding rods require the correct safety type, bar size, base material, process and project specification.
HOW TO SELECT
A four-step spacer and accessory selection process for faster quotations.
Providing the technical interface and product details early helps avoid selecting an item by appearance alone.
01. Define the Function
Is the requirement reinforcement cover, radial pile-cage spacing, levelling, bearing, edge formation, void closure, safety or fabrication?
02. Confirm the Interface
State the bar, cage, slab, tile, mould, bearing surface or base material that the accessory must fit.
03. Confirm Product Detail
Provide cover height, diameter, thickness, profile, length, material, load or performance requirement and approved drawing.
04. Confirm Quantity & Delivery
Send quantity, UAE project location, required date, packing needs and whether the supply is phased.
BUYER GUIDE & QUOTATION CHECKLIST
Send the right details so the closest spacer or accessory can be identified.
Use the checklist below for contractor, precast-factory, piling, roofing, installation and procurement enquiries.
TECHNICAL INFORMATION
What should you send for product matching?
- Required product type or reference image
- Rebar, cage, slab, tile, profile or base-material details
- Required concrete cover, spacing, thickness or dimensions
- Material, loading, safety or performance requirement
- Approved drawing, BOQ, consultant note or sample reference
PROJECT & DELIVERY INFORMATION
What should you send for a quotation?
- Required quantity or estimated consumption
- Project name and UAE location
- Required delivery date and programme
- Packaging, phased supply or sample requirement
- Receiving contact, access window and delivery restrictions
What affects the price of spacers and construction accessories?
Pricing can depend on product type, dimensions, concrete-cover height, bar or component compatibility, material, load or safety requirement, quantity, packaging, sourcing route and UAE delivery programme. A model- or drawing-based review is required for a reliable quotation.
JETONS TRADING SUPPORT
Construction-accessory sourcing and logistics coordination across the UAE.
Jetons Trading supports project teams by connecting the product requirement, supplier route, quantity and delivery programme.
Product Matching
Review the application, product image, dimensions, concrete-cover requirement, profile and approved project information.
BOQ & Sample Sourcing
Use a BOQ line, drawing, sample or reference photo when the exact catalogue model is not yet known.
Quantity & Packing
Coordinate unit quantity, bag or box packing, estimated consumption and phased project requirements.
UAE Delivery Planning
Confirm destination, required date, receiving window, access and delivery sequence for the quotation.
CONCRETE SPACERS & ACCESSORIES FAQ
Common questions from contractors, precast factories and project buyers.
These direct answers help identify the correct enquiry route while keeping final product selection subject to the approved technical requirement.
What spacer and accessory products does Jetons Trading offer?
The current range includes Wheel Spacer, Clip Spacer, Shim Pads, Hollow Core Cap, Four-Legged Spacer, Pile Cage Spacer, Chamfer, Roof Tile Spacer, Rebar Cap and Welding Rod.
What is a concrete reinforcement spacer?
A concrete reinforcement spacer is an accessory used to support or position reinforcement so the approved concrete cover and steel arrangement can be maintained during compatible construction or precast work.
What is the difference between a wheel spacer and a clip spacer?
A wheel spacer is generally selected for circular or radial cover around compatible reinforcement or cages. A clip spacer attaches to a compatible bar and supports a defined cover position. Final selection depends on bar size, cover, load and approved details.
Which spacer is used for pile reinforcement cages?
The product range includes a dedicated Pile Cage Spacer. Confirm cage diameter, reinforcement size, required radial cover, fixing method and spacing before ordering.
Are shim pads the same as reinforcement spacers?
No. Shim pads are generally selected for levelling, packing, separation or bearing adjustment, while reinforcement spacers are selected to position reinforcement and maintain concrete cover.
What details are required to select a spacer?
Confirm the application, reinforcement or component size, required cover or spacing, profile, dimensions, load, material requirement, quantity and approved drawing or specification.
What are hollow core caps used for?
Hollow core caps are selected to close compatible hollow-core slab voids. Confirm the slab profile, void diameter, cap dimensions, production stage and project requirement.
What is a concrete chamfer used for?
A chamfer profile is used in compatible formwork or precast moulds to create a bevelled concrete edge and reduce sharp exposed corners. Confirm profile dimensions, length, material and fixing method.
Can Jetons source project-specific sizes?
Project-specific sourcing can be reviewed when the required dimensions, drawing, sample, BOQ description, quantity and delivery programme are provided.
Does Jetons Trading coordinate supply across the UAE?
Jetons Trading is based in Abu Dhabi and coordinates construction and road-material supply with logistics support. Confirm the UAE project location, quantity and required date with the quotation request.
What information is needed for a quotation?
Send the product name, required size or concrete cover, compatible bar or component dimensions, quantity, project location, required delivery date and any consultant, client or authority requirement.
START YOUR ENQUIRY
Need concrete spacers or construction accessories for a UAE project?
Send the product name, required cover or dimensions, compatible bar or component details, quantity, project location and required delivery date.
DIVISIONS
Jetons General Contracting
Jetons General Trading
Beam Concrete Works
Jetons Transportation
QUICK LINKS
About Us
Projects
FAQ's
Careers
CONTACT US
📞 Phone
✉️ Email
📮 P.O. Box
UAE Coverage
Abu Dhabi | Dubai | Sharjah | Ajman | RAK | Al Ain
Supply • Transportation • Installation • Traffic Management
Project Support Across UAE
CERTIFIED & TRUSTED
Certified to International Standards • Trusted by Clients • Committed to Quality
