PRECAST CONCRETE BARRIER

Single-Face 3 m Concrete Barrier With Loop Supplier in the UAE

Single-Face 3 m Unit With a Project-Specific Loop Detail

The Single-Face 3 m With Loop is a precast concrete barrier unit used to form part of a compatible single-face barrier arrangement that requires the loop detail shown on the approved product drawing. It is identified by its single-face profile and the catalogue reference “3 m”.

“Single-face” describes one principal barrier face, with the complete rear geometry defined by the approved drawing. The title confirms that the model includes a loop detail; the approved drawing must state whether that detail is used for connection, lifting or another purpose.

Jetons can coordinate product supply, UAE-wide delivery, lifting, installation, painting and traffic-management support according to the agreed project scope.

Request Price & Availability

View Technical Information

Available support: Product supply • UAE-wide delivery • Lifting and installation • Painting • Traffic-management coordination

Single-Face 3 m Concrete Barrier With Loop supplied for UAE road, traffic-management and infrastructure projects

PRODUCT PURPOSE

Single-Face 3 m Unit With a Confirmed Loop Detail

Confirm the exact dimensions, connections, fixing and system compatibility from the approved drawing.

Product Type

Precast concrete barrier unit

Profile

Single-face

Configuration

Loop-detail designation

Published Reference

3 m designation • loop detail

DIRECT PRODUCT ANSWER

What Is a Single-Face 3 m With Loop Barrier?

The Single-Face 3 m With Loop is a precast concrete barrier unit used to form part of a compatible single-face barrier arrangement that requires the loop detail shown on the approved product drawing. It is identified by its single-face profile and the catalogue reference “3 m”.

Published Jetons reference: The current Jetons data sheet identifies the 3 m single-face model with a loop detail. The controlled drawing must confirm the exact dimensions and whether the loop is intended for connection, lifting or another embedded function.

“Single-face” describes one principal barrier face, with the complete rear geometry defined by the approved drawing. The title confirms that the model includes a loop detail; the approved drawing must state whether that detail is used for connection, lifting or another purpose.

The product should be selected from the approved barrier layout. Exact dimensions, adjoining units, connections or fixing, installation method and any required performance documentation must be checked before ordering.

Related buyer search terms: single-face concrete barrier, single-sided road barrier, 3 m precast barrier, loop-detail barrier and loop-connected concrete barrier. These phrases can overlap in everyday procurement, but the approved model, profile, dimensions, connection and installed-system requirements determine technical suitability.

WHY THIS CONFIGURATION

Why Specify the Single-Face 3 m With Loop?

This catalogue model gives contractors, engineers and procurement teams a clear product entity for drawings, BOQs, technical submissions and commercial enquiries.

Single-face geometry: supports approved layouts requiring one principal barrier face.
3 m model designation: provides a longer catalogue unit for planned barrier sequencing.
Loop-detail identification: makes the special embedded detail visible during technical review and procurement.
Compatibility control: requires the purpose, dimensions and interface of the loop to be confirmed before use.
Integrated support: can be supplied with delivery, lifting, installation and site coordination.

Important: use this model only where the controlled project information requires its exact configuration.

TYPICAL APPLICATIONS

Where Is the Single-Face 3 m With Loop Used?

The following are typical project environments for review. The approved layout, system details and project specification remain the final basis for selection.

Road-Edge Arrangements

May be reviewed where the approved layout requires a single-side or single-face barrier geometry along a road or work area.

Temporary Work Zones

Can support approved traffic-management arrangements separating vehicles from construction or utility activities.

Construction Boundaries

May define excavation limits, active work areas, equipment zones or controlled project boundaries.

Utility & Municipal Works

Can be assessed for road openings, utility corridors and municipal works with confirmed placement details.

Industrial & Development Sites

May support vehicle management and restricted-area layouts within industrial, commercial or development projects.

Compatible Interfaces

Must be coordinated with the adjoining barrier model, connection detail and any special embedded feature shown on the drawing.

Single-Face 3 m With Loop concrete barrier technical data sheet

Data-sheet note: the current reference image for Single-Face 3 m With Loop is displayed here. Use the latest controlled drawing or PDF for procurement, production, technical submission and installation.

TECHNICAL INFORMATION

Published Product Reference and Buyer Checks

The current Jetons data sheet provides the published product reference. Searchable values are repeated below for buyers and technical teams, while the latest controlled drawing remains the governing document for production, approval and installation.

Product Name

Single-Face 3 m Concrete Barrier With Loop

Product Type

Precast concrete barrier unit

Profile

Single-face / single-sided profile

Catalogue Designation

3 m with loop detail

Published Length

The title uses a 3 m designation; verify exact overall length and tolerance from the current controlled drawing

Loop Function

Confirm whether the loop is for connection, lifting or another embedded purpose; do not assume from appearance

Adjoining Barrier

Confirm the exact compatible continuation, end or transition unit and the approved connection arrangement

Orientation

Confirm exposed face, rear geometry, loop position and installation direction

Unit Weight

Confirm before transport, offloading and crane planning

Concrete / Reinforcement

Use the approved product drawing and project specification for concrete, reinforcement, cover and durability

Lifting / Handling

Use only the approved lifting points, rigging angles and handling method

Finish / Painting

Confirm finish, colour pattern, logos and identification requirements

Performance Documentation

Request evidence applicable to this exact model and installed system when a classification or approval is required

Drawing-control rule: use the published values for product identification and enquiry only. If any field, product code, table or illustration differs from a later approved drawing, the latest controlled project document governs.

Open Current Data Sheet

Request Controlled Drawing / PDF

PRODUCT SELECTION

Is the Single-Face 3 m With Loop Right for Your Project?

This model should be ordered only when the approved layout, BOQ or technical submission requires its exact profile and configuration.

Buyer check: identify the complete barrier system—not only the individual unit. Ends, transitions, connections, adjoining units, installation and performance requirements can affect suitability.

Discuss Product Suitability

1. Approved Barrier Layout

Confirm that the current drawing specifically identifies the Single-Face 3 m With Loop at the required location. Select the unit from controlled project information rather than a photograph or product name alone.

2. Adjoining Barrier Models

Identify the barrier units, transitions or end treatments placed on each side. Profiles, heights, connections and system details must be compatible.

3. Product-Specific Detail

Confirm the purpose, dimensions and location of the loop shown on the data sheet. Do not assume that it is a lifting or connection loop without controlled documentation.

4. Temporary or Permanent Use

State whether the arrangement is temporary or permanent. This may affect the fixing, anchoring, connection, finish, documentation and installation method.

5. Performance & Authority Requirements

Where the project requires a containment level, crash-test report, RTA or ITC requirement, consultant approval or another standard, request the verified documentation applicable to this exact model and installed arrangement.

6. Delivery, Lifting & Site Access

Confirm unit weight, lifting points, vehicle access, gate passes, permits, offloading scope, crane or Hiab requirements, storage area, placement sequence, working hours, painting and project markings.

RELATED BARRIER OPTIONS

How Does the Single-Face 3 m With Loop Compare With Related Models?

The correct product depends on the required profile, length, end or connection detail, application and complete approved barrier system.

Barrier Model

Main Difference

Typical Selection Reason

Single-Face 3 m With Loop

Single-face 3 m unit with a loop detail

Selected only when the approved drawing requires this exact loop configuration.

Single-Face 2 m End

Single-face end unit with a 2 m designation

Selected where the layout calls for one principal barrier face and this end geometry.

Single-Side Flat 940–2.4 m

Single-side flat model with 940 / 2.4 m designation

Selected where the approved drawing calls for this project-specific single-side geometry.

Single-Side Permanent 3 m

Single-side 3 m model designated for permanent use

Selected for an approved permanent layout with confirmed fixing and foundation details.

Single-Side Transition Barrier

Single-side transition unit

Selected where the approved barrier system must interface between compatible configurations.

View All Concrete Barriers

Ask for Model Comparison

UAE-WIDE PROJECT SUPPORT

Supply, Delivery and Installation Options

Clients can request the Single-Face 3 m With Loop as a product-only order or combine it with transportation, lifting, installation, painting and traffic-management support.

Product Supply

Supply based on the confirmed Single-Face 3 m With Loop model, approved drawing, quantity, finish and project programme.

Explore Beam Concrete Work →

Transportation & Delivery

Vehicle allocation, load planning, route coordination, delivery sequencing and project-site access across the UAE.

View Transportation →

Lifting & Installation

Offloading, lifting, positioning, alignment, connection or fixing, supervision, inspection and handover support.

View Installation Services →

Traffic Management Support

Road closures, diversions, TMA support, signage, marshals and temporary work-zone control where required.

View Traffic Management →

UAE-WIDE SUPPLY, DELIVERY & INSTALLATION

Single-Face 3 m Barrier With Loop Support Across the Emirates

Jetons coordinates product supply and can review transportation, lifting, installation, painting and traffic-management requirements throughout the UAE. Final availability and scope depend on the approved model, quantity, programme and site conditions.

Abu Dhabi, Al Ain & Al Dhafra

Confirm route restrictions, gate passes, delivery windows, remote-site access, laydown space, crane or Hiab position and any ITC or project-specific traffic-management requirements.

Dubai, Sharjah & Ajman

Review urban access, timed deliveries, road permits, unloading restrictions, working-hour controls, storage, installation sequence and coordination with active road or development works.

RAK, Fujairah & Umm Al Quwain

Plan mountain, coastal, industrial or remote-site routes, vehicle access, unloading areas, ground-bearing conditions, lifting reach, storage supports and installation supervision.

Product-specific planning: For the 3 m loop-detail unit, site planning should verify the purpose of the loop, approved lifting method, connection compatibility, trailer loading and crane or Hiab access before dispatch.

REQUEST A QUOTATION

Request Price, Availability and Technical Information

Send the available product and project information so our team can review the exact Single-Face 3 m With Loop requirement and the required supply, delivery or installation scope.

When the final drawing is not yet approved, share the latest BOQ, layout or data sheet and identify which information is still pending.

Request Price & Availability

Product & Technical Information

Product name: Single-Face 3 m With Loop
Official model or product code, if applicable
Required quantity
Approved drawing or latest data sheet
Adjoining barrier models and orientation
Required connection, fixing, loop, bolt or transition detail
Concrete, reinforcement or finish specification
Painting colours, logos and project markings
Required test, approval or technical-submission documents

Project, Delivery & Installation Information

Project name and location
Main contractor or project entity
Consultant or authority requirements
Required delivery date and sequence
Gate-pass, permit and working-hour requirements
Site-access and storage restrictions
Offloading and lifting responsibility
Supply only, delivery, installation or traffic-management scope

PRODUCT FAQ

Single-Face 3 m With Loop Barrier FAQs

These answers address common contractor, engineer and procurement questions before a technical review or quotation.

QUICK ANSWER

The Single-Face 3 m With Loop is a precast concrete barrier unit used to form part of a compatible single-face barrier arrangement that requires the loop detail shown on the approved product drawing. The approved data sheet must confirm dimensions, weight, reinforcement, connection or fixing details, lifting arrangements and any required performance documentation before procurement or installation.

What is a Single-Face 3 m With Loop Barrier?

It is a precast concrete barrier unit identified by its single-face profile and 3 m designation. Its purpose is to form part of a compatible single-face barrier arrangement that requires the loop detail shown on the approved product drawing. Exact dimensions and system details must be confirmed from the approved data sheet.

What is the loop used for?

The live title confirms that a loop detail exists, but its function should be taken from the approved drawing. Do not assume it is for lifting or connection without verification.

Where can this barrier be used?

It may be reviewed for compatible single-face road, work-zone, construction, utility and controlled-site barrier layouts.

Is the unit exactly 3 m long?

The product name uses a 3 m designation. Confirm exact dimensions and tolerances from the approved data sheet.

Can it connect to any single-face barrier?

No. The adjoining unit, loop detail and connection arrangement must be compatible with the approved system.

What technical information should be confirmed before ordering?

Confirm the latest data sheet, exact dimensions, unit weight, concrete and reinforcement requirements, connections or embedded details, lifting points, finish, painting, quantity and applicable performance documentation.

Does Jetons provide delivery and installation?

Yes. The quotation can include UAE-wide transportation, offloading, lifting, positioning, installation, supervision, painting and traffic-management support according to the agreed scope.

Can the product be delivered across the UAE?

Delivery can be coordinated for Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah, Al Ain and other UAE locations, subject to project access, permits, vehicle requirements and the confirmed programme.

What information is needed for pricing?

Provide the product name, quantity, approved drawing or latest data sheet, project location, required date, finish requirements, offloading scope, installation requirements and any consultant or authority specification.

Compare Related Concrete Barrier Models

Review related units when the approved layout requires a different face profile, length, connection, end treatment, transition or application.

REQUEST PRODUCT SUPPORT

Need a Single-Face 3 m With Loop Barrier?

Send your approved barrier layout, required quantity, project location, technical specification and delivery programme. Jetons will review the exact product requirement and the appropriate manufacturing, transportation, lifting, installation, painting and traffic-management scope.

Request a Quotation

Discuss Product Suitability

ChatGPT_Image_Jun_28__2026__04_50_10_PM-removebg-preview

DIVISIONS

Jetons General Contracting

Jetons General Trading

Beam Concrete Works

Jetons Transportation

QUICK LINKS

About Us

Projects

FAQ's

Careers

CONTACT US

📞 Phone

✉️ Email

💬 WhatsApp

📮 P.O. Box



UAE Coverage



Supply • Transportation • Installation • Traffic Management

Project Support Across UAE



CERTIFIED & TRUSTED

Certified to International Standards • Trusted by Clients • Committed to Quality